Public access

Predicting the slagging potential of co-fired coal with sewage sludge and wood biomass

MU Degereji, SR Gubba, DB Ingham, L Ma, M Pourkashanian, A Williams, ...

Fuel 108, 550-556, 2013

Effect of PTFE loading of gas diffusion layers on the performance of proton exchange membrane fuel cells running at high‐efficiency operating conditions

MS Ismail, KJ Hughes, DB Ingham, L Ma, M Pourkashanian

International Journal of Energy Research 37 (13), 1592-1599, 2013

Numerical simulations on the combustion and emission characteristics of a non-premixed NH₃/CH₄swirling flame using LES-FGM method

N Pestheruwe, H Zhang, L Ma, R Yuan

AIAA SCITECH 2023 Forum, 1722, 2023

Available based on mandate: 33

Characteristics of liquid flow in a rotating packed bed for CO2 capture: A CFD analysis

P Xie, X Lu, X Yang, D Ingham, L Ma, M Pourkashanian

Chemical Engineering Science 172, 216-229, 2017

Assessing the potential of urban wind energy in a major UK city using an analytical model

JT Millward-Hopkins, AS Tomlin, L Ma, DB Ingham, M Pourkashanian

Renewable Energy 60, 701-710, 2013

Modelling the anaerobic digestion of solid organic waste–Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach

D Poggio, M Walker, W Nimmo, L Ma, M Pourkashanian

Waste Management 53, 40-54, 2016

Understanding the ash deposition formation in Zhundong lignite combustion through dynamic CFD modelling analysis

X Yang, D Ingham, L Ma, H Zhou, M Pourkashanian

Fuel 194, 533-543, 2017

A porous media model for CFD simulations of gas-liquid two-phase flow in rotating packed beds

X Lu, P Xie, DB Ingham, L Ma, M Pourkashanian

Chemical Engineering Science 189, 123-134, 2018

Flow behaviour of drop and jet modes of a laminar falling film on horizontal tubes

H Ding, P Xie, D Ingham, L Ma, M Pourkashanian

International Journal of Heat and Mass Transfer 124, 929-942, 2018

A validated numerical investigation of the effects of high blockage ratio and train and tunnel length upon underground railway aerodynamics

D Cross, B Hughes, D Ingham, L Ma

Journal of Wind Engineering and Industrial Aerodynamics 146, 195-206, 2015

A mesoscale 3D CFD analysis of the liquid flow in a rotating packed bed

P Xie, X Lu, H Ding, X Yang, D Ingham, L Ma, M Pourkashanian

Chemical Engineering Science 199, 528-545, 2019

Modelling of CO2 absorption in a rotating packed bed using an Eulerian porous media approach

X Lu, P Xie, DB Ingham, L Ma, M Pourkashanian

Chemical Engineering Science 199, 302-318, 2019

Mapping the wind resource over UK cities

JT Millward-Hopkins, AS Tomlin, L Ma, DB Ingham, M Pourkashanian

Renewable Energy 55, 202-211, 2013

Prediction of the radiative heat transfer in small and large scale oxy-coal furnaces

X Yang, A Clements, J Szuhánszki, X Huang, OF Moguel, J Li, J Gibbins, ...

Applied Energy 211, 523-537, 2018

Enhancing the piston effect in underground railway tunnels

D Cross, B Hughes, D Ingham, L Ma

Tunnelling and Underground Space Technology 61, 71-81, 2017

CFD analysis of exhaust gas recirculation in a micro gas turbine combustor for CO 2 capture

A De Santis, DB Ingham, L Ma, M Pourkashanian

Fuel 173, 146-154, 2016

Experimental and theoretical methods for evaluating ash properties of pine and El Cerrejon coal used in co-firing

P Xing, LI Darvell, JM Jones, L Ma, M Pourkashanian, A Williams

Fuel 183, 39-54, 2016

Prediction of particle sticking efficiency for fly ash deposition at high temperatures

X Yang, D Ingham, L Ma, M Troiano, M Pourkashanian

Proceedings of the Combustion Institute 37 (3), 2995-3003, 2019