View article

The development of a dry-coupled piezoelectric transducer system for the detection of corrosion in chemical plant pipework using cylindrical Lamb waves is described. It is shown that the axisymmetricL(0,2) mode at a frequency of about 70 kHz is an attractive mode to use for longdistance propagation. The results show that a ring of piezoelectric length-expander elements can be used to excite theL(0,2) mode and to suppress all the nonaxisymmetric modes. Tests have been carried out both with the piezoelectric elements bonded to the pipe and fabricated into a simple transducer which was clamped against the pipe. The performance of the dry-coupled system was very similar to that of the bonded elements. In pulse echo tests, the noise floor obtained with the dry-coupled system was less than 1% of the amplitude of the propagatingL(0,2) mode. The drycoupled transducers provide a simple, light, readily …