View article

The present work aimed to study sugarcane bagasse fibers pre-treated with fungi and using NaOH/ anthraquinone (AQ) in chemical pulping processes for applications in composite materials. Bagasse was decayed with 250 mg of Ceriporiopsis subvermispora inoculum in a 20 L bioreactor. After that, samples were submitted to similar conditions of decaying without inoculum charge. Decayed and undecayed fibers were treated with NaOH 12.5 wt%, 0.15 of AQ and a 12:1 (v/w) liquor:bagasse ratio at 160°C. Then, all obtained fibers were characterized according to their chemical composition. Dried biotreated (decayed) and control (undecayed) fibers were mixed through an extruder process with polypropylene. Later, composite granulates were injected directly in mold with cavities for tensile, flexural and shear tests. Composite materials with 10 and 20 wt% fibers were submitted to static mechanical standard tests and DMA (Dynamic Mechanical Analysis) to evaluate the effect of biotreatment. Biotreatment, cook time (pulping), and fiber content contributed to improvements in the mechanical properties of the composites. The interface between fiber and matrix was increased with the biotreatment and pulping of fibers. Furthermore, DMA results also showed that fiber incorporation into PP improved the modulus, mainly for biotreated fibers/PP composites. The T_g (tan δ data) from composites was dislocated at lower temperatures with respect to neat PP due to the influence of fibers on matrix.