View article

Struvite crystallization using fluidized bed reactors (FBRs) is one of the most commonly used methods for nutrient recovery from different waste streams. However, struvite recovery from swine wastewater containing much higher solids using FBR has not been studied extensively. In this study, we therefore designed and optimized the key operating conditions parameters, i.e., pH (9.0, 9.5, and 10.0), circulation rate (CR) (1.5, 3.0, and 4.5 L/L_reactor·h), and hydraulic retention time (HRT) (1, 3, and 5 h) of FBR to ensure efficient nutrient removal and struvite crystallization from swine wastewater using response surface methodology (RSM) with central composite design (CCD) as experimental design. A magnesium/phosphorus (Mg/P) molar ratio of 1.3 was maintained with MgCl₂ according to ortho-phosphate (O-P) concentration of influent and an air diffuser was set to supply air with 0.03 L air/L_reactor·min. The O-P recovery efficiency of over 91% was achieved through the entire runs. Among the operational parameters, pH did not show any significant effect on NH₄-N recovery, particle size, and struvite production rate (SPR). The optimal CR over 2.94 L/L_reactor·h was found to be appropriate for efficient removal of nutrients and struvite crystallization. While optimizing the HRT, priority of the process operation such as the production of larger struvite particles or increased struvite productivity should be considered. Therefore, the optimal operational parameters of pH 9.0, CR > 2.94 L/L_reactor·h, and HRT of 1 or 5 h were chosen to obtain better responses through RSM analyses. The findings of this study would be useful in designing and operating either …