Sintering parameters consequence on microstructure and hardness of copper alloy prepared by powder metallurgy B Deepanraj, N Senthilkumar, T Tamizharasan Materials Today: Proceedings 80, 2468-2473, 2023 | 28 | 2023 |
A study on effect of primary and secondary reinforcements in hybrid metal matrix composite P Raj, B Deepanraj, N Senthilkumar, T Tamizharasan AIP Conference Proceedings 2393 (1), 2022 | 3 | 2022 |
Numerical Modelling, Simulation, and Analysis of the End‐Milling Process Using DEFORM‐3D with Experimental Validation B Deepanraj, N Senthilkumar, G Hariharan, T Tamizharasan, ... Advances in Materials Science and Engineering 2022 (1), 5692298, 2022 | 17 | 2022 |
ANFIS-based prediction of MRR and surface roughness in electrical discharge machining of HAMMC D Mala, N Senthilkumar, B Deepanraj, T Tamizharasan Green Materials and Advanced Manufacturing Technology, 75-94, 2020 | 9 | 2020 |
Surface modification of AZ61 magnesium alloy with nano TiO2/Al2O3 using laser cladding technique S Sundaraselvan, N Senthilkumar, T Tamizharasan, AN Sait Materials Today: Proceedings 21, 717-721, 2020 | 23 | 2020 |
Taguchi’s methodology of optimizing turning parameters over chip thickness ratio in machining P/M AMMC T Tamizharasan, N Senthilkumar, V Selvakumar, S Dinesh SN Applied Sciences 1 (2), 160, 2019 | 83 | 2019 |
Modelling and Simulation of Conventional Drilling Process using Deform 3D M Anbarasan, N Senthilkumar, T Tamizharasan Int. J. Mech. Dyn. Anal 5, 9-16, 2019 | 3 | 2019 |
Optimization of energy conservation in air conditioned system smart class room of a school building: Approach to human comfort and energy management V Thiyagarajan, T Tamizharasan, N Senthilkumar, B Karthikeyan International Journal of Engineering 11 (1), 119-137, 2018 | 8 | 2018 |
Enhancing human comfort and improving illuminance level in smart class room through optimization approach V Thiyagarajan, T Tamizharasan, N Senthilkumar, B Karthikeyan J. of Advanced Engineering Research 5 (1), 20-30, 2018 | 3 | 2018 |
Optimization and performance analysis of uncoated and coated carbide inserts during hard turning AISI D2 steel using hybrid GRA-PCA technique N Senthilkumar, V Selvakumar, T Tamizharasan Applied Mechanics and Materials 852, 151-159, 2016 | 43 | 2016 |
Machinability evaluation of Al–4% Cu–7.5% SiC metal matrix composite by Taguchi–Grey relational analysis and NSGA-II V Selvakumar, S Muruganandam, T Tamizharasan, N Senthilkumar Sādhanā 41, 1219-1234, 2016 | 42 | 2016 |
Flank wear and surface roughness prediction in hard turning via artificial neural network and multiple regressions N Senthilkumar, T Tamizharasan Australian Journal of Mechanical Engineering 13 (1), 31-45, 2015 | 31 | 2015 |
Optimization of emission and combustion parameters of diesel engine with Polanga oil-diesel-nano particle blend using response surface methodology. M Santhanamuthu, T Tamizharasan, TP Mani | | 2014 |
Experimental investigation and performance analysis of cemented carbide inserts of different geometries using Taguchi based grey relational analysis N Senthilkumar, T Tamizharasan, V Anandakrishnan Measurement 58, 520-536, 2014 | 147 | 2014 |
Application of response surface methodology and firefly algorithm for optimizing multiple responses in turning AISI 1045 steel N Senthilkumar, T Tamizharasan, S Gobikannan Arabian Journal for Science and Engineering 39, 8015-8030, 2014 | 66 | 2014 |
A Finite Element Simulation study on effects of variation in Machining and Geometrical parameters in Turning N Senthilkumar, A Pon, T Tamizharasan Applied Mechanics and Materials 592, 3-7, 2014 | 3 | 2014 |
Effect of tool geometry in turning AISI 1045 steel: experimental investigation and FEM analysis N Senthilkumar, T Tamizharasan Arabian Journal for Science and Engineering 39, 4963-4975, 2014 | 58 | 2014 |
Evaluation of CI engine performance fuelled by Diesel-Polanga oil blends doped with iron oxide nanoparticles M Santhanamuthu, S Chittibabu, T Tamizharasan, TP Mani Int J Chem Tech Res 6 (2), 1299-1308, 2014 | 37 | 2014 |
Optimization of cutting tool geometry based on flank wear–DoE, PSO and SAA approach T Tamizharasan, JK Barnabas NISCAIR-CSIR, India, 2014 | 7 | 2014 |
Optimisation of machining and geometrical parameters in turning process using Taguchi method N Senthilkumar, T Ganapathy, T Tamizharasan Australian Journal of Mechanical Engineering 12 (2), 233-246, 2014 | 56 | 2014 |