Evaluation of thermal-hydraulic performance of hydrocarbon refrigerants during flow boiling in a microchannels array heat sink CA Chávez, HLSL Leão, G Ribatski Applied Thermal Engineering 111, 703-717, 2017 | 32 | 2017 |
An analysis of the effect of the footprint orientation on the thermal-hydraulic performance of a microchannels heat sink during flow boiling of R245fa HLSL Leao, CA Chávez, FJ do Nascimento, G Ribatski Applied Thermal Engineering 90, 907-926, 2015 | 31 | 2015 |
Unidimensional simulation of drying stress in radiata pine wood C Salinas, C Chavez, RA Ananias, D Elustondo Drying Technology 33 (8), 996-1005, 2015 | 24 | 2015 |
Modeling unsteady heat and mass transfer with prediction of mechanical stresses in wood drying CA Chávez, NO Moraga, CH Salinas, RC Cabrales, RA Ananías International Communications in Heat and Mass Transfer 123, 105230, 2021 | 13 | 2021 |
Thermal oscillations during flow boiling of hydrocarbon refrigerants in a microchannels array heat sink CA Chávez, NO Moraga, G Ribatski Applied Thermal Engineering 157, 113725, 2019 | 12 | 2019 |
Simulation of Drying Stresses in Eucalyptus nitens Wood R Pérez-Pena, N., Chávez, C., Salinas, C., and Ananías Bioresources 13 (1), 1413-1424, 2018 | 10* | 2018 |
Simulation of wood drying stresses using CVFEM CH Salinas, CA Chavez, Y Gatica, RA Ananias Latin American applied research 41 (1), 23-30, 2011 | 8 | 2011 |
Two-dimensional simulation of mechanical stresses during isothermal drying of Eucalyptus nitens wood RAA Carlos H. Salinas, Cristian A. Chávez, Natalia Pérez-Peña, Héctor Vargas Wood Science and Technology 54 (1), 187–201, 2020 | 5 | 2020 |
Two Two-dimensional wood drying stress simulation using control control-volume mixed finite element methods (CVFEM) C Salinas, C Chávez, Y Gatica, R Ananias Ingeniería e Investigación 31 (1), 171-183, 2011 | 3 | 2011 |
Simulación bidimensional de esfuerzos de secado en la madera usando CVFEM C Salinas, C Chávez, Y Gatica, R Ananias Ingeniería e Investigación 31 (1), 171-183, 2011 | 3 | 2011 |
Simulation of the Dryng Stresses in Wood C Salinas, R Ananias, Y Gatica, C Chavez Mecánica Computacional 29 (85), 8347-8354, 2010 | 3 | 2010 |
Simulación del secado convencional de madera usando CVFEM C Salinas, C Chávez, Y Gatica, R Ananias Revista Técnica de la Facultad de Ingeniería Universidad del Zulia 34 (1 …, 2011 | 2 | 2011 |
Turbulence models performance to predict fluid mechanics and heat transfer characteristics of fluids flow in micro-scale channels EP Miranda, DF Sempértegui-Tapia, CA Chávez Numerical Heat Transfer, Part A: Applications, 1-20, 2024 | 1 | 2024 |
ESTUDIO COMPARATIVO SOBRE MODELOS DE TURBULENCIA EN FLUJO DE REFRIGERANTES CON BAJO GWP EN EL INTERIOR DE MICROCANALES E Miranda, D Sempértegui-Tapia, C Chávez | 1 | 2021 |
The effect of footprint orientation on the performance of a heat spreader based on flow boiling inside micro-scale channels HLSL Leão, CA Chávez, G Ribatski 22nd International Congress of Mechanical Engineering, COBEM. November, 3-7, 2013 | 1 | 2013 |
3-D numerical simulation of forced convection heat transfer in microscale rectangular channels for low GWP refrigerants DA Moya, NO Moraga, DF Sempértegui-Tapia, CA Chávez Numerical Heat Transfer, Part A: Applications, 1-19, 2024 | | 2024 |
Determination of mechano-sorptive coefficients in Eucalyptus nitens wood under isothermal conditions R Salinas, C., Chavez, C. A., Cárdenas, F., Torres, J., and Ananias BioResources 17 (1), 1047-1061, 2022 | | 2022 |
RANS TURBULENCE MODELS PERFORMANCE TO PREDICT HEAT TRANSFER CHARACTERISTICS OF LOW GWP FLUIDS FLOW IN MICROCHANNELS E Miranda, D Sempértegui-Tapia, C Chávez Investigación & Desarrollo 21 (1), 79-86, 2021 | | 2021 |
Transferência de calor e perda de pressão durante a ebulição convectiva de hidrocarbonetos em um dissipador de calor baseado em multi-microcanais CA Chávez Toro Universidade de São Paulo, 2017 | | 2017 |
A Critical Review on Thermal Instabilities in Multi-Microchannels Heat Sinks Due to Confined Bubble Growth CA Chávez, HLSL Leão, G Ribatski 15th Brazilian Congress of Thermal Sciences and Engineering, 2014 | | 2014 |