Thermal performance of direct two-phase refrigerant cooling for lithium-ion batteries in electric vehicles SH Hong, DS Jang, S Park, S Yun, Y Kim Applied Thermal Engineering 173, 115213, 2020 | 130 | 2020 |
Performance characteristics of a novel heat pipe-assisted liquid cooling system for the thermal management of lithium-ion batteries DS Jang, S Yun, SH Hong, W Cho, Y Kim Energy Conversion and Management 251, 115001, 2022 | 111 | 2022 |
Performance improvement of heat pumps using novel microchannel heat exchangers with plain-louver fins during periodic frosting and defrosting cycles in electric vehicles SH Hong, DS Jang, S Yun, JH Baek, Y Kim Energy Conversion and Management 223, 113306, 2020 | 65 | 2020 |
Heat transfer and stress characteristics of additive manufactured FCCZ lattice channel using thermal fluid-structure interaction model S Yun, J Kwon, DC Lee, HH Shin, Y Kim International Journal of Heat and Mass Transfer 149, 119187, 2020 | 54 | 2020 |
Composite fouling characteristics of CaCO3 and CaSO4 in plate heat exchangers at various operating and geometric conditions KS Song, J Lim, S Yun, D Kim, Y Kim International Journal of Heat and Mass Transfer 136, 555-562, 2019 | 54 | 2019 |
Performance improvement of hot stamping die for patchwork blank using mixed cooling channel designs with straight and conformal channels S Yun, J Kwon, W Cho, DC Lee, Y Kim Applied Thermal Engineering 165, 114562, 2020 | 34 | 2020 |
Numerical analysis on thermo-fluid–structural performance of graded lattice channels produced by metal additive manufacturing S Yun, DC Lee, DS Jang, M Lee, Y Kim Applied Thermal Engineering 193, 117024, 2021 | 29 | 2021 |
Review of the liquid hydrogen storage tank and insulation system for the high-power locomotive D Kang, S Yun, B Kim Energies 15 (12), 4357, 2022 | 26 | 2022 |
Two-phase flow patterns and pressure drop of a low GWP refrigerant R-1234ze (E) in a plate heat exchanger under adiabatic conditions DC Lee, D Kim, S Yun, Y Kim International Journal of Heat and Mass Transfer 145, 118816, 2019 | 26 | 2019 |
Evaporation heat transfer characteristics of R-245fa in a shell and plate heat exchanger for very-high-temperature heat pumps KS Song, S Yun, DC Lee, K Kim, Y Kim International Journal of Heat and Mass Transfer 151, 119408, 2020 | 23 | 2020 |
Comparative heating performance evaluation of hybrid ground-source heat pumps using serial and parallel configurations with the application of ground heat exchanger M Lee, D Cha, S Yun, SM Yoon, Y Kim Energy Conversion and Management 229, 113743, 2021 | 22 | 2021 |
Flow patterns and heat transfer characteristics of R-1234ze (E) for downward condensation in a plate heat exchanger DC Lee, S Yun, JY Choi, Y Kim International Journal of Heat and Mass Transfer 175, 121373, 2021 | 20 | 2021 |
Numerical analysis on the dynamic response of a plate-and-frame membrane humidifier for PEMFC vehicles under various operating conditions S Yun, D Cha, KS Song, SH Hong, SH Lee, W Yang, Y Kim Open Physics 16 (1), 641-650, 2018 | 18 | 2018 |
Experimental and numerical analyses of quenching performance of hot stamping blanks by two-phase refrigerant cooling using R1234yf S Yun, SH Hong, KS Song, J Kwon, Y Kim International Journal of Heat and Mass Transfer 173, 121231, 2021 | 14 | 2021 |
Simulation-based comparative seasonal performance evaluation of single-stage heat pump and modulated two-stage injection heat pump using rotary compressors with various … SH Lee, Y Jeon, B Kim, S Yun, Y Kim Applied Thermal Engineering 159, 113892, 2019 | 14 | 2019 |
Performance improvement of tailored die quenching using material combinations with phase change material in hot stamping S Yun, SH Lee, KS Song, W Cho, Y Kim International Journal of Heat and Mass Transfer 161, 120286, 2020 | 10 | 2020 |
Refrigerant charge reduction in R600a domestic refrigerator-freezer by optimizing hot-wall condenser geometry W Cho, DS Jang, SH Lee, S Yun, Y Kim International Journal of Refrigeration 117, 295-306, 2020 | 10 | 2020 |
Experimental evaluation of single-and two-phase pressure drops through inlet and outlet ports in a plate heat exchanger DC Lee, KS Song, S Yun, Y Kim International Journal of Heat and Mass Transfer 158, 120009, 2020 | 9 | 2020 |
Air-side heat transfer characteristics of ambient air vaporizers with various geometric parameters under cryogenic frosting conditions J Kwon, S Yun, S Lee, W Cho, Y Kim International Journal of Heat and Mass Transfer 184, 122245, 2022 | 8 | 2022 |
Optimization of semi-interlocking heat sinks for hotspot thermal management using multi-objective genetic algorithm HH Shin, S Yun, MH Park, DS Jang, Y Kim International Journal of Heat and Mass Transfer 183, 122170, 2022 | 7 | 2022 |