A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties EO Olakanmi, RF Cochrane, KW Dalgarno Progress in materials science 74, 401-477, 2015 | 1838 | 2015 |
Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: Effect of processing conditions and powder properties EO Olakanmi Journal of Materials Processing Technology 213 (8), 1387-1405, 2013 | 530 | 2013 |
Densification mechanism and microstructural evolution in selective laser sintering of Al–12Si powders EO Olakanmi, RF Cochrane, KW Dalgarno Journal of Materials Processing Technology 211 (1), 113-121, 2011 | 233 | 2011 |
Laser sintering of blended Al‐Si powders E Olatunde Olakanmi, KW Dalgarno, RF Cochrane Rapid Prototyping Journal 18 (2), 109-119, 2012 | 92 | 2012 |
Laser-assisted cold-sprayed corrosion-and wear-resistant coatings: a review EO Olakanmi, M Doyoyo Journal of Thermal Spray Technology 23, 765-785, 2014 | 79 | 2014 |
Critical materials and processing challenges affecting the interface and functional performance of wood polymer composites (WPCs) EO Olakanmi, MJ Strydom Materials Chemistry and Physics 171, 290-302, 2016 | 76 | 2016 |
Multi-variable optimisation of the quality characteristics of fiber-laser cladded Inconel-625 composite coatings EO Olakanmi, ST Nyadongo, K Malikongwa, SA Lawal, A Botes, ... Surface and Coatings Technology 357, 289-303, 2019 | 49 | 2019 |
Effect of mixing time on the bed density, and microstructure of selective laser sintered (sls) aluminium powders EO Olakanmi Materials Research 15, 167-176, 2012 | 41 | 2012 |
Mechanism of fiber/matrix bond and properties of wood polymer composites produced from alkaline‐treated Daniella oliveri wood flour EO Olakanmi, EA Ogunesan, E Vunain, RA Lafia‐Araga, M Doyoyo, ... Polymer Composites 37 (9), 2657-2672, 2016 | 38 | 2016 |
Optimization of the quality characteristics of laser-assisted cold-sprayed (LACS) aluminum coatings with Taguchi design of experiments (DOE) EO Olakanmi Materials and Manufacturing Processes 31 (11), 1490-1499, 2016 | 38 | 2016 |
Deposition mechanism and microstructure of laser-assisted cold-sprayed (LACS) Al-12 wt.% Si coatings: effects of laser power EO Olakanmi, M Tlotleng, C Meacock, S Pityana, M Doyoyo Jom 65, 776-783, 2013 | 38 | 2013 |
Enzymatic synthesis of highly flexible lignin cross-linked succinyl-chitosan hydrogels reinforced with reed cellulose fibres O Haske-Cornelius, S Bischof, B Beer, MJ Bartolome, EO Olakanmi, ... European Polymer Journal 120, 109201, 2019 | 20 | 2019 |
Direct selective laser sintering of aluminium alloy powders EO Olakanmi University of Leeds, 2008 | 20 | 2008 |
Experimental and numerical analyses of geometrical and microstructural features of Tribaloy T-800 composite coating deposited via laser cladding-assisted with pre-heat (LCAP … ST Nyadongo, EO Olakanmi, SL Pityana Journal of Manufacturing Processes 69, 84-111, 2021 | 19 | 2021 |
Spheroidisation and oxide disruption phenomena in direct selective laser melting (SLM) of pre-alloyed Al-Mg and Al-Si powders EO Olakanmi, RF Cochrane, KW Dalgarno Proceedings: TMS Annual Meetings and Exhibition, 371-380, 2009 | 14 | 2009 |
Conceptual design framework for setting up aluminum alloy powder production system for Selective Laser Melting (SLM) process G Matsagopane, EO Olakanmi, A Botes, S Kutua Jom 71, 1840-1857, 2019 | 13 | 2019 |
Effects of Daniella oliveri Wood Flour Characteristics on the Processing and Functional Properties of Wood Polymer Composites EO Olakanmi, OM Thompson, E Vunain, M Doyoyo, R Meijboom Materials and Manufacturing Processes 31 (8), 1073-1084, 2016 | 11 | 2016 |
Isothermal oxidation performance of laser cladding assisted with preheat (LCAP) tribaloy T-800 composite coatings deposited on EN8 ST Nyadongo, SL Pityana, EO Olakanmi Coatings 11 (7), 843, 2021 | 10 | 2021 |
Characterisation of the Core Binding Properties of Fatty Based Oils EO Olakanmi, AO Arome Int. J. Phys. Sci 4 (11), 623-628, 2009 | 10 | 2009 |
Optimisation of the wear resistance properties of laser cladded T-800 coatings K Malikongwa, M Tlotleng, EO Olakanmi The International Journal of Advanced Manufacturing Technology 114 (1), 481-496, 2021 | 8 | 2021 |