Articles with public access mandates - Surendra Kumar MakineniLearn more
Not available anywhere: 35
A new class of high strength high temperature Cobalt based γ–γ′ Co–Mo–Al alloys stabilized with Ta addition
SK Makineni, A Samanta, T Rojhirunsakool, T Alam, B Nithin, AK Singh, ...
Acta Materialia 97, 29-40, 2015
Mandates: Department of Science & Technology, India
Synthesis of a new tungsten-free γ–γ′ cobalt-based superalloy by tuning alloying additions
SK Makineni, B Nithin, K Chattopadhyay
Acta Materialia 85, 85-94, 2015
Mandates: Department of Science & Technology, India
A new tungsten-free γ–γ’Co–Al–Mo–Nb-based superalloy
SK Makineni, B Nithin, K Chattopadhyay
Scripta Materialia 98, 36-39, 2015
Mandates: Department of Science & Technology, India
On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys
M Kolb, LP Freund, F Fischer, I Povstugar, SK Makineni, B Gault, D Raabe, ...
Acta Materialia 145, 247-254, 2018
Mandates: German Research Foundation
On the formation of hierarchical microstructure in a Mo-doped NiCoCr medium-entropy alloy with enhanced strength-ductility synergy
J He, SK Makineni, W Lu, Y Shang, Z Lu, Z Li, B Gault
Scripta Materialia 175, 1-6, 2020
Mandates: German Research Foundation
In-situ observation of strain partitioning and damage development in continuously cooled carbide-free bainitic steels using micro digital image correlation
A Kumar, A Dutta, SK Makineni, M Herbig, RH Petrov, J Sietsma
Materials Science and Engineering: A 757, 107-116, 2019
Mandates: Netherlands Organisation for Scientific Research, Federal Ministry of …
Phase evolution and crystallography of precipitates during decomposition of new “tungsten-free” Co (Ni)–Mo–Al–Nb γ–γ′ superalloys at elevated temperatures
SK Makineni, B Nithin, D Palanisamy, K Chattopadhyay
Journal of Materials Science 51 (17), 1-18, 2016
Mandates: Department of Science & Technology, India
Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications
A Kumar, SK Makineni, A Dutta, C Goulas, M Steenbergen, RH Petrov, ...
Materials Science and Engineering: A 759, 210-223, 2019
Mandates: Netherlands Organisation for Scientific Research
(Al, Zn) 3Zr dispersoids assisted η′ precipitation in anAl-Zn-Mg-Cu-Zr alloy
H Zhao, Y Chen, B Gault, SK Makineni, D Ponge, D Raabe
Materialia 10, 100641, 2020
Mandates: Federal Ministry of Education and Research, Germany
Effect of interface dislocations on mass flow during high temperature and low stress creep of single crystal Ni-base superalloys
J He, L Cao, SK Makineni, B Gault, G Eggeler
Scripta Materialia 191, 23-28, 2021
Mandates: National Natural Science Foundation of China, German Research Foundation
The role of Ti addition on the evolution and stability of γ/γ′ microstructure in a Co-30Ni-10Al-5Mo-2Ta alloy
S Mukhopadhyay, P Pandey, N Baler, K Biswas, SK Makineni, ...
Acta Materialia 208, 116736, 2021
Mandates: Department of Science & Technology, India
Development of new γ′-strengthened Co-based superalloys with low mass density, high solvus temperature and high temperature strength
P Pandey, S Mukhopadhyay, C Srivastava, SK Makineni, ...
Materials Science and Engineering: A 790, 139578, 2020
Mandates: Department of Science & Technology, India
On the effect of W addition on microstructural evolution and γ′ precipitate coarsening in a Co–30Ni–10Al–5Mo–2Ta–2Ti alloy
N Baler, P Pandey, D Palanisamy, SK Makineni, G Phanikumar, ...
Materialia 10, 100632, 2020
Mandates: Department of Science & Technology, India
Insight into the effect of Ti-addition on diffusion-controlled growth and texture of Nb3Sn intermetallic superconductor phase
S Santra, SK Makineni, G Shankar, S Suwas, K Chattopadhyay, ...
Materialia 6, 100276, 2019
Mandates: Department of Science & Technology, India
Low-density, high-temperature Co base superalloys
SK Makineni, MP Singh, K Chattopadhyay
Annual Review of Materials Research 51 (1), 187-208, 2021
Mandates: Department of Science & Technology, India
Dynamic strain aging in the intermediate temperature regime of near-α titanium alloy, IMI 834: Experimental and modeling
P Agrawal, S Karthikeyan, SK Makineni, B Gault, D Banerjee
Acta Materialia 222, 117436, 2022
Mandates: Department of Science & Technology, India
Strength and stability through variable micro segregation behaviour of Ta and Zr solutes at intermetallic interfaces in Al-Cu alloys
U Bansal, MP Singh, SK Sinha, DK Sahu, S Mondol, SK Makineni, A Paul, ...
Acta Materialia 259, 119254, 2023
Mandates: Department of Science & Technology, India
The interplay of precipitation of ordered compounds and interfacial segregation in Al‐Cu‐Hf‐Si alloys for high-temperature strength
U Bansal, MP Singh, S Mondol, SK Sinha, SK Makineni, A Paul, ...
Acta Materialia 240, 118355, 2022
Mandates: Department of Science & Technology, India
Impact of boron as an alloying addition on the microstructure, thermo-physical properties and creep resistance of a tungsten-free Co-base γ/γ′ superalloy
A Sharma, S Dixit, N Baler, P Agrawal, SK Makineni, K Chattopadhyay
Materials Science and Engineering: A 855, 143899, 2022
Mandates: Department of Science & Technology, India
Effects of minor Nb alloying on the thermal stability and mechanical responses of a γ/γ′ type high-entropy alloy with high Fe content
J He, N Li, SK Makineni, Y Zhao, W Liu, L Wang, Z Wang, M Song
Materials Science and Engineering: A 851, 143610, 2022
Mandates: National Natural Science Foundation of China
Publication and funding information is determined automatically by a computer program