Potential and challenges of metal-matrix-composites reinforced with carbon nanofibers and carbon nanotubes E Neubauer, M Kitzmantel, M Hulman, P Angerer Composites Science and Technology 70 (16), 2228-2236, 2010 | 255 | 2010 |
Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components W Lengauer, I Duretek, M Fürst, V Schwarz, J Gonzalez-Gutierrez, ... International Journal of Refractory Metals and Hard Materials 82, 141-149, 2019 | 158 | 2019 |
Microstructure and mechanical properties of Ni1, 5Co1, 5CrFeTi0, 5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering I Moravcik, J Cizek, J Zapletal, Z Kovacova, J Vesely, P Minarik, ... Materials & Design 119, 141-150, 2017 | 149 | 2017 |
Mechanical and microstructural characterization of powder metallurgy CoCrNi medium entropy alloy I Moravcik, J Cizek, Z Kovacova, J Nejezchlebova, M Kitzmantel, ... Materials Science and Engineering: A 701, 370-380, 2017 | 116 | 2017 |
Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy I Moravcik, L Gouvea, V Hornik, Z Kovacova, M Kitzmantel, E Neubauer, ... Scripta Materialia 157, 24-29, 2018 | 92 | 2018 |
Characterisation of sputter deposited niobium and boron interlayer in the copper–diamond system J Hell, M Chirtoc, C Eisenmenger-Sittner, H Hutter, N Kornfeind, ... Surface and Coatings Technology 208, 24-31, 2012 | 58 | 2012 |
Fracture and mechanical properties of lightweight alumina ceramics prepared by fused filament fabrication M Orlovská, Z Chlup, Ľ Bača, M Janek, M Kitzmantel Journal of the European Ceramic Society 40 (14), 4837-4843, 2020 | 53 | 2020 |
Influence of sintering temperature, SiC particle size and Y2O3 addition on the densification, microstructure and oxidation resistance of ZrB2–SiC ceramics Z Kováčová, Ľ Bača, E Neubauer, M Kitzmantel Journal of the European Ceramic Society 36 (12), 3041-3049, 2016 | 48 | 2016 |
Bending properties of lightweight copper specimens with different infill patterns produced by material extrusion additive manufacturing, solvent debinding and sintering J Gonzalez-Gutierrez, S Cano, JV Ecker, M Kitzmantel, F Arbeiter, C Kukla, ... Applied Sciences 11 (16), 7262, 2021 | 31 | 2021 |
Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene T Li, J Gonzalez-Gutierrez, I Raguž, C Holzer, M Li, P Cheng, ... Additive Manufacturing 37, 101700, 2021 | 28 | 2021 |
Processing by additive manufacturing based on plasma transferred arc of hastelloy in air and argon atmosphere EM Perez-Soriano, E Ariza, C Arevalo, I Montealegre-Melendez, ... Metals 10 (2), 200, 2020 | 27 | 2020 |
Analysis of the Microstructure and Mechanical Properties of Titanium-Based Composites Reinforced by Secondary Phases and B4C Particles Produced via Direct … I Montealegre-Melendez, C Arévalo, E Ariza, EM Pérez-Soriano, ... Materials 10 (11), 1240, 2017 | 20 | 2017 |
Influence of binder composition and material extrusion (MEX) parameters on the 3D printing of highly filled copper feedstocks M Sadaf, S Cano, J Gonzalez-Gutierrez, M Bragaglia, S Schuschnigg, ... Polymers 14 (22), 4962, 2022 | 19 | 2022 |
Microstructural and XRD Analysis and Study of the Properties of the System Ti-TiAl-B4C Processed under Different Operational Conditions I Montealegre-Meléndez, C Arévalo, EM Pérez-Soriano, M Kitzmantel, ... Metals 8 (5), 367, 2018 | 19 | 2018 |
Tailoring a refractory high entropy alloy by powder metallurgy process optimization L Moravcikova-Gouvea, I Moravcik, V Pouchly, Z Kovacova, M Kitzmantel, ... Materials 14 (19), 5796, 2021 | 17 | 2021 |
Characterization of the mechanical and thermal interface of copper films on carbon substrates modified by boron based interlayers D Schäfer, C Eisenmenger-Sittner, M Chirtoc, P Kijamnajsuk, N Kornfeind, ... Surface and Coatings Technology 205 (12), 3729-3735, 2011 | 17 | 2011 |
Preparation of fully dense boron carbide ceramics by Fused Filament Fabrication (FFF) M Vozárová, E Neubauer, Ľ Bača, M Kitzmantel, J Feranc, V Trembošová, ... Journal of the European Ceramic Society 43 (5), 1751-1761, 2023 | 15 | 2023 |
Preparation and properties of extrusion-based 3D-printed hardmetal and cermet parts W Lengauer, I Duretek, V Schwarz, C Kukla, M Kitzmantel, E Neubauer, ... Proceedings of the Euro PM2018 Congress & Exhibition Euro PM2018 Proceedings …, 2018 | 15 | 2018 |
Analysis of the influence of starting materials and processing conditions on the properties of W/Cu alloys I Montealegre-Meléndez, C Arévalo, EM Perez-Soriano, E Neubauer, ... Materials 10 (2), 142, 2017 | 15 | 2017 |
Influence of sintering temperature on the microstructure and mechanical properties of in situ reinforced titanium composites by inductive hot pressing C Arévalo, I Montealegre-Meléndez, E Ariza, M Kitzmantel, ... Materials 9 (11), 919, 2016 | 15 | 2016 |