A first approach to the analysis of fatigue parameters by thermal variations in static tests on plastics C Clienti, G Fargione, G La Rosa, A Risitano, G Risitano Engineering Fracture Mechanics 77 (11), 2158-2167, 2010 | 78 | 2010 |
Fatigue analysis by acoustic emission and thermographic techniques G La Rosa, C Clienti, FL Savio Procedia Engineering 74, 261-268, 2014 | 47 | 2014 |
Proposta di utilizzo di metodologie termografiche per il controllo di qualità di componenti meccanici C Clienti, G La Rosa, A Risitano, R D’Andrea Frattura ed Integrità Strutturale 4 (12), 37-47, 2010 | 21 | 2010 |
Fatigue limit by thermal analysis of specimen surface in mono axial traction test A Risitano, R Giacomo, C Clienti EPJ web of conferences 6, 38010, 2010 | 19 | 2010 |
Determination of fatigue limit by mono-axial tensile specimens using thermal analysis A Risitano, C Clienti, G Risitano Key Engineering Materials 452, 361-364, 2011 | 17 | 2011 |
Determination of the fatigue limit by semi static tests G Risitano, A Risitano, C Clienti Convegno Nazionale IGF XXI, 322-330, 2011 | 15 | 2011 |
Experimental analysis of pedicle screws G La Rosa, C Clienti, R Mineo, A Audenino Procedia Structural Integrity 2, 1244-1251, 2016 | 14 | 2016 |
The use of digital image correlation to correct the thermoelastic curves in static tests G La Rosa, C Clienti, AMC Garrano Procedia Structural Integrity 2, 2140-2147, 2016 | 12 | 2016 |
Experimental study to verify the fatigue limit found by thermal analysis of specimen surface in mono axial traction test G Risitano, C Clienti Key Engineering Materials 488, 795-798, 2012 | 11 | 2012 |
Energetic analysis of fatigue hysteresis by thermographic and digital image correlation methodologies G La Rosa, F Lo Savio, F Giudice, C Clienti, A Marino Cugno Garrano Fatigue & Fracture of Engineering Materials & Structures 43 (11), 2597-2607, 2020 | 10 | 2020 |
Comparison between thermal energy and acoustic emission for the fatigue behavior of steels F Giudice, G La Rosa, FL Savio, C Clienti Procedia Structural Integrity 18, 886-890, 2019 | 10 | 2019 |
A novel procedure for tracking the measuring point in thermoelastic curves using DIC G La Rosa, C Clienti, AMC Garrano, FL Savio Engineering Fracture Mechanics 183, 53-65, 2017 | 7 | 2017 |
Experimental tests on new titanium alloy interbody cervical cages G La Rosa, C Clienti, R Mineo Procedia Structural Integrity 13, 373-378, 2018 | 6 | 2018 |
Low-cycle fatigue hysteresis by thermographic and digital image correlation methodologies: a first approach G La Rosa, C Clienti, AMC Garrano, FL Savio Procedia Structural Integrity 13, 1583-1588, 2018 | 5 | 2018 |
Numerical analysis of a custom-made pelvic prosthesis G La Rosa, C Clienti, S Di Bella, F Rizza Procedia Structural Integrity 2, 1295-1302, 2016 | 4 | 2016 |
Design of a new intervertebral disc prosthesis G La Rosa, C Clienti, D Corallo Materials Today: Proceedings 7, 529-536, 2019 | 3 | 2019 |
Asymmetric gear wheel thermographic analysis G Di Francesco, S Marini, G Grasso, C Clienti Colloque Photomecanique, Étude du comportement des matèriaux et des …, 2004 | 3 | 2004 |
Identification of local phenomena of plasticity in concrete under compression test A Risitano, A D’Aveni, G Fargione, C Clienti Procedia Structural Integrity 2, 2123-2131, 2016 | 1 | 2016 |
Thermal variations in static tests on plastics: a first approach to the fatigue parameters analysis C Clienti, G Fargione, G La Rosa, A Risitano, G Risitano International Conference on CRACK PATHS, 2009 | 1 | 2009 |
Modelli viscoelastici del tessuto osseo mediante prove di rilassamento C Clienti, C Indelicato, A Marino Convegno Nazionale AIAS,(4–8 September 2007), 2007 | 1 | 2007 |