Three-dimensional numerical analysis for rock slope stability using shear strength reduction method J Shen, M Karakus Canadian geotechnical journal 51 (2), 164-172, 2014 | 152 | 2014 |
Determination of Mohr–Coulomb shear strength parameters from generalized Hoek–Brown criterion for slope stability analysis J Shen, SD Priest, M Karakus Rock mechanics and rock engineering 45, 123-129, 2012 | 112 | 2012 |
Chart-based slope stability assessment using the Generalized Hoek–Brown criterion J Shen, M Karakus, C Xu International Journal of Rock Mechanics and Mining Sciences 64, 210-219, 2013 | 103 | 2013 |
Simplified method for estimating the Hoek-Brown constant for intact rocks J Shen, M Karakus Journal of Geotechnical and Geoenvironmental Engineering 140 (6), 04014025, 2014 | 73 | 2014 |
A comparative study for empirical equations in estimating deformation modulus of rock masses J Shen, M Karakus, C Xu Tunnelling and Underground Space Technology 32, 245-250, 2012 | 73 | 2012 |
A simplified failure criterion for intact rocks based on rock type and uniaxial compressive strength J Shen, R Jimenez, M Karakus, C Xu Rock mechanics and rock engineering 47, 357-369, 2014 | 66 | 2014 |
Direct expressions for linearization of shear strength envelopes given by the Generalized Hoek–Brown criterion using genetic programming J Shen, M Karakus, C Xu Computers and Geotechnics 44, 139-146, 2012 | 55 | 2012 |
The effects of blast damage zone thickness on rock slope stability H Zheng, T Li, J Shen, C Xu, H Sun, Q Lü Engineering Geology 246, 19-27, 2018 | 48 | 2018 |
Predicting the shear strength parameters of sandstone using genetic programming J Shen, R Jimenez Bulletin of Engineering Geology and the Environment 77, 1647-1662, 2018 | 36 | 2018 |
A particle mechanics approach for the dynamic strength model of the jointed rock mass considering the joint orientation C Zhou, C Xu, M Karakus, J Shen International Journal for Numerical and Analytical Methods in Geomechanics …, 2019 | 35 | 2019 |
An empirical UCS model for anisotropic blocky rock masses F Huang, J Shen, M Cai, C Xu Rock Mechanics and Rock Engineering 52, 3119-3131, 2019 | 35 | 2019 |
A systematic approach to the calibration of micro-parameters for the flat-jointed bonded particle model C Zhou, C Xu, M Karakus, J Shen Geomechanics and Engineering 16 (5), 471-482, 2018 | 34 | 2018 |
Comparison of existing methods and a new tensile strength based model in estimating the Hoek-Brown constant mi for intact rocks W Wang, J Shen Engineering Geology 224, 87-96, 2017 | 33 | 2017 |
A shear strength model for anisotropic blocky rock masses with persistent joints J Shen, Z Shu, M Cai, S Du International Journal of Rock Mechanics and Mining Sciences 134, 104430, 2020 | 28 | 2020 |
Effects of flaw width on cracking behavior of single-flawed rock specimens J Shen, S Zhan, M Karakus, J Zuo Bulletin of Engineering Geology and the Environment 80, 1701-1711, 2021 | 27 | 2021 |
A new damage model accounting the effect of joint orientation for the jointed rock mass C Zhou, M Karakus, C Xu, J Shen Arabian Journal of Geosciences 13, 1-13, 2020 | 26 | 2020 |
The Hoek-Brown Failure Criterion--From Theory to Application J Zuo, J Shen Springer, 2020 | 26 | 2020 |
Estimation of REV for fractured rock masses based on Geological Strength Index H Huang, J Shen, Q Chen, M Karakus International Journal of Rock Mechanics and Mining Sciences 126, 104179, 2020 | 22 | 2020 |
Non-linear shear strength model for coal rocks J Shen, L Wan, J Zuo Rock Mechanics and Rock Engineering 52, 4123-4132, 2019 | 19 | 2019 |
Predicting the shear strength of saw-tooth jointed rocks using genetic programming J Shen, W Shang, M Cedrick, H Huang, H Sun, Q Xu Arabian Journal of Geosciences 14, 1-9, 2021 | 5 | 2021 |