Articles with public access mandates - Anthony RollettLearn more
Not available anywhere: 21
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
R Cunningham, C Zhao, N Parab, C Kantzos, J Pauza, K Fezzaa, T Sun, ...
Science 363 (6429), 849-852, 2019
Mandates: US Department of Energy, US Department of Defense, US National Aeronautics …
Critical instability at moving keyhole tip generates porosity in laser melting
C Zhao, ND Parab, X Li, K Fezzaa, W Tan, AD Rollett, T Sun
Science 370 (6520), 1080-1086, 2020
Mandates: US National Science Foundation, US Department of Energy, US Department of …
Characterization of metal additive manufacturing surfaces using synchrotron X-ray CT and micromechanical modeling
CA Kantzos, RW Cunningham, V Tari, AD Rollett
Computational Mechanics 61, 575-580, 2018
Mandates: US Department of Energy, US Department of Defense
An investigation of process parameter modifications on additively manufactured Inconel 718 parts
C Kantzos, J Pauza, R Cunningham, SP Narra, J Beuth, A Rollett
Journal of Materials Engineering and Performance 28, 620-626, 2019
Mandates: US Department of Energy
Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach
N Haghdadi, D Abou-Ras, P Cizek, PD Hodgson, AD Rollett, H Beladi
Materials Letters 196, 264-268, 2017
Mandates: Australian Research Council
Effect of microstructure on the elasto-viscoplastic deformation of dual phase titanium structures
T Ozturk, AD Rollett
Computational Mechanics 61, 55-70, 2018
Mandates: US National Science Foundation, US Department of Energy
Austenite reconstruction elucidates prior grain size dependence of toughness in a low alloy steel
C Ranger, V Tari, S Farjami, MJ Merwin, L Germain, A Rollett
Metallurgical and Materials Transactions A 49, 4521-4535, 2018
Mandates: US Department of Defense
A method for quantitative 3D mesoscale analysis of solid oxide fuel cell microstructures using Xe-plasma focused ion beam (PFIB) coupled with SEM
R Mahbub, T Hsu, WK Epting, NT Nuhfer, GA Hackett, H Abernathy, ...
ECS Transactions 78 (1), 2159, 2017
Mandates: US National Science Foundation, US Department of Energy
The role of grain orientation and grain boundary characteristics in the mechanical twinning formation in a high manganese twinning-induced plasticity steel
V Shterner, IB Timokhina, AD Rollett, H Beladi
Metallurgical and Materials Transactions A 49, 2597-2611, 2018
Mandates: US Department of Defense
Evolution of microstructure and texture during deformation and recrystallization of heavily rolled Cu-Cu multilayer
KS Suresh, AD Rollett, S Suwas
Metallurgical and Materials Transactions A 44, 3866-3881, 2013
Mandates: Department of Science & Technology, India
The AFRL additive manufacturing modeling challenge: predicting micromechanical fields in AM IN625 using an FFT-based method with direct input from a 3D microstructural image
CK Cocke, AD Rollett, RA Lebensohn, AD Spear
Integrating Materials and Manufacturing Innovation 10 (2), 157-176, 2021
Mandates: US Department of Energy, US Department of Defense
Entrapped gas and process parameter-induced porosity formation in additively manufactured 17-4 PH stainless steel
D Basu, Z Wu, JLL Meyer, E Larson, R Kuo, A Rollett
Journal of Materials Engineering and Performance 30, 5195-5202, 2021
Mandates: US Department of Energy
Study of powder gas entrapment and its effects on porosity in 17-4 PH stainless steel parts fabricated in laser powder bed fusion
Z Wu, D Basu, JLL Meyer, E Larson, R Kuo, J Beuth, A Rollett
JOM 73, 177-188, 2021
Mandates: US Department of Energy
An isogeometric analysis-based topology optimization framework for 2D cross-flow heat exchangers with manufacturability constraints
X Liang, A Li, AD Rollett, YJ Zhang
Engineering with Computers 38 (6), 4829-4852, 2022
Mandates: US National Science Foundation, US Department of Defense
Interpretable machine learning for texture-dependent constitutive models with automatic code generation for topological optimization
K Garbrecht, M Aguilo, A Sanderson, A Rollett, RM Kirby, J Hochhalter
Integrating Materials and Manufacturing Innovation 10, 373-392, 2021
Mandates: US Department of Energy
Towards quantification of local electrochemical parameters in microstructures of solid oxide fuel cell electrodes using high performance computations
T Hsu, R Mahbub, WK Epting, H Abernathy, GA Hackett, AD Rollett, ...
ECS Transactions 78 (1), 2711, 2017
Mandates: US National Science Foundation, US Department of Energy
Microstructure and Texture Evolution During Thermomechanical Processing of Al0.25CoCrFeNi High-Entropy Alloy
LA Santos, S Singh, AD Rollett
Metallurgical and Materials Transactions A 50, 5433-5444, 2019
Mandates: US Department of Defense
Evolution of texture and microstructure in deformed and annealed copper-iron multilayer
KS Suresh, AD Rollett, S Suwas
Metallurgical and Materials Transactions A 47, 852-868, 2016
Mandates: US Department of Energy, Department of Science & Technology, India
Predicting Melt Pool Dimensions for Wire-Feed Directed Energy Deposition Process
Z Yang, AK Verma, L Smith, A Guzel, H Chen, PC Pistorius, AD Rollett
Integrating Materials and Manufacturing Innovation 11 (4), 532-544, 2022
Mandates: US Department of Defense
Crystallographic Textures from the Exoskeleton of the Lobster Homarus Americanus and Calculation of the Mechanical Properties of the Calcite Phase
L Raue, H Klein, D Raabe, H Fabritius
Applications of Texture Analysis, 637-654, 2008
Mandates: German Research Foundation
Publication and funding information is determined automatically by a computer program