Articles with public access mandates - David San MartinLearn more
Not available anywhere: 5
A review of the thermal stability of metastable austenite in steels: Martensite formation
Y Li, D San Martín, J Wang, C Wang, W Xu
Journal of Materials Science & Technology 91, 200-214, 2021
Mandates: National Natural Science Foundation of China
Evolution of pearlite microstructure in low-carbon cast microalloyed steel due to the addition of La and Ce
H Torkamani, S Raygan, C Garcia-Mateo, J Rassizadehghani, Y Palizdar, ...
Metallurgical and materials transactions A 49, 4495-4508, 2018
Mandates: Government of Spain
Mechanisms of ultrafine-grained austenite formation under different isochronal conditions in a cold-rolled metastable stainless steel
C Celada-Casero, BM Huang, MM Aranda, JR Yang, D San Martin
Materials Characterization 118, 129-141, 2016
Mandates: Government of Spain
Continuous hardening during isothermal aging at 723 K (450 C) of a precipitation hardening stainless steel
C Celada-Casero, J Chao, E Urones-Garrote, D San Martin
Metallurgical and Materials Transactions A 47, 5280-5287, 2016
Mandates: Government of Spain
Stainless Steels
D San-Martin, C Celada-Casero, J Vivas, C Capdevila
High-Performance Ferrous Alloys, 459-566, 2021
Mandates: Government of Spain
Available somewhere: 40
The influence of silicon in tempered martensite: Understanding the microstructure–properties relationship in 0.5–0.6 wt.% C steels
B Kim, E Boucard, T Sourmail, D San Martín, N Gey, ...
Acta Materialia 68, 169-178, 2014
Mandates: Government of Spain
The effect of silicon on the nanoprecipitation of cementite
B Kim, C Celada, D San Martín, T Sourmail, PEJ Rivera-Díaz-del-Castillo
Acta materialia 61 (18), 6983-6992, 2013
Mandates: Government of Spain
Correlation between vanadium carbide size and hydrogen trapping in ferritic steel
A Turk, D San Martín, PEJ Rivera-Díaz-del-Castillo, EI Galindo-Nava
Scripta Materialia 152, 112-116, 2018
Mandates: UK Engineering and Physical Sciences Research Council
Contributions of rare earth element (La, Ce) addition to the impact toughness of low carbon cast niobium microalloyed steels
H Torkamani, S Raygan, C Garcia Mateo, J Rassizadehghani, Y Palizdar, ...
Metals and Materials International 24, 773-788, 2018
Mandates: Government of Spain
Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering
HE Sabzi, E Hernandez-Nava, XH Li, H Fu, D San-Martín, ...
Materials & Design 212, 110246, 2021
Mandates: National Natural Science Foundation of China, UK Engineering and Physical …
Modeling retained austenite in Q&P steels accounting for the bainitic transformation and correction of its mismatch on optimal conditions
Y Li, S Chen, C Wang, D San Martín, W Xu
Acta Materialia 188, 528-538, 2020
Mandates: National Natural Science Foundation of China
In-situ investigation of strain-induced martensitic transformation kinetics in an austenitic stainless steel by inductive measurements
C Celada-Casero, H Kooiker, M Groen, J Post, D San-Martin
Metals 7 (7), 271, 2017
Mandates: Government of Spain
Effect of ausforming temperature on the microstructure of G91 steel
J Vivas, C Capdevila, JA Jimenez, M Benito-Alfonso, D San-Martin
Metals 7 (7), 236, 2017
Mandates: Government of Spain
Morphological and crystallographic features of granular and lath-like bainite in a low carbon microalloyed steel
D De-Castro, A Eres-Castellanos, J Vivas, FG Caballero, D San-Martín, ...
Materials characterization 184, 111703, 2022
Mandates: Government of Spain
The influence of La and Ce addition on inclusion modification in cast niobium microalloyed steels
H Torkamani, S Raygan, C Garcia Mateo, J Rassizadehghani, J Vivas, ...
Metals 7 (9), 377, 2017
Mandates: Government of Spain
Importance of austenitization temperature and ausforming on creep strength in 9Cr ferritic/martensitic steel
J Vivas, C Capdevila, E Altstadt, M Houska, D San-Martín
Scripta Materialia 153, 14-18, 2018
Mandates: Government of Spain
Microstructural degradation and creep fracture behavior of conventionally and thermomechanically treated 9% chromium heat resistant steel
J Vivas, C Capdevila, E Altstadt, M Houska, I Sabirov, D San-Martín
Metals and Materials International 25, 343-352, 2019
Mandates: Government of Spain
Modelling and design of stress-induced martensite formation in metastable β Ti alloys
S Neelakantan, EI Galindo-Nava, D San Martin, J Chao, ...
Materials Science and Engineering: A 590, 140-146, 2014
Mandates: Government of Spain
Chemical banding revealed by chemical etching in a cold-rolled metastable stainless steel
C Celada, I Toda-Caraballo, B Kim, D San Martín
Materials characterization 84, 142-152, 2013
Mandates: Government of Spain
Microstructural mechanisms controlling the mechanical behaviour of ultrafine grained martensite/austenite microstructures in a metastable stainless steel
C Celada-Casero, BM Huang, JR Yang, D San-Martín
Materials & Design 181, 107922, 2019
Mandates: Government of Spain
Publication and funding information is determined automatically by a computer program