| Experimental investigation and performance analysis of cemented carbide inserts of different geometries using Taguchi based grey relational analysis N Senthilkumar, T Tamizharasan, V Anandakrishnan Measurement 58, 520-536, 2014 | 147 | 2014 |
| Analysis of tool wear and surface finish in hard turning T Tamizharasan, T Selvaraj, A Noorul Haq The International Journal of Advanced Manufacturing Technology 28, 671-679, 2006 | 135 | 2006 |
| Taguchi’s methodology of optimizing turning parameters over chip thickness ratio in machining P/M AMMC T Tamizharasan, N Senthilkumar, V Selvakumar, S Dinesh SN Applied Sciences 1 (2), 160, 2019 | 83 | 2019 |
| Optimization of cutting insert geometry using DEFORM-3 D: numerical simulation and experimental validation T Tamizharasan, S Kumar International Journal of Simulation Modelling 11 (2), 65-76, 2012 | 79 | 2012 |
| Application of response surface methodology and firefly algorithm for optimizing multiple responses in turning AISI 1045 steel N Senthilkumar, T Tamizharasan, S Gobikannan Arabian Journal for Science and Engineering 39, 8015-8030, 2014 | 65 | 2014 |
| Effect of tool geometry in turning AISI 1045 steel: experimental investigation and FEM analysis N Senthilkumar, T Tamizharasan Arabian Journal for Science and Engineering 39, 4963-4975, 2014 | 57 | 2014 |
| Optimisation of machining and geometrical parameters in turning process using Taguchi method N Senthilkumar, T Ganapathy, T Tamizharasan Australian Journal of Mechanical Engineering 12 (2), 233-246, 2014 | 55 | 2014 |
| Investigation of the effects of cooling in hard turning operations A Noorul Haq, T Tamizharasan The International Journal of Advanced Manufacturing Technology 30 (9), 808-816, 2006 | 54 | 2006 |
| An hybrid Taguchi-grey relational technique and cuckoo search algorithm for multi-criteria optimization in hard turning of AISI D3 steel N Senthilkumar, T Tamizharasan, V Anandakrishnan Journal of Advanced Engineering Research 1 (1), 16-31, 2014 | 44 | 2014 |
| Optimization and performance analysis of uncoated and coated carbide inserts during hard turning AISI D2 steel using hybrid GRA-PCA technique N Senthilkumar, V Selvakumar, T Tamizharasan Applied Mechanics and Materials 852, 151-159, 2016 | 43 | 2016 |
| Machinability evaluation of Al–4% Cu–7.5% SiC metal matrix composite by Taguchi–Grey relational analysis and NSGA-II V Selvakumar, S Muruganandam, T Tamizharasan, N Senthilkumar Sādhanā 41, 1219-1234, 2016 | 42 | 2016 |
| Mechanical characterization and tribological behaviour of Al-Gr-B4C metal matrix composite prepared by stir casting technique N Senthilkumar, T Tamizharasan, M Anbarasan Journal of Advanced Engineering Research 1 (1), 48-59, 2014 | 40 | 2014 |
| Impact of interface temperature over flank wear in hard turning using carbide inserts NS Kumar, T Tamizharasan Procedia Engineering 38, 613-621, 2012 | 40 | 2012 |
| Evaluation of CI engine performance fuelled by Diesel-Polanga oil blends doped with iron oxide nanoparticles M Santhanamuthu, S Chittibabu, T Tamizharasan, TP Mani Int J Chem Tech Res 6 (2), 1299-1308, 2014 | 37 | 2014 |
| Experimental investigation of cutting zone temperature and flank wear correlation in turning AISI 1045 steel with different tool geometries N Senthilkumar, T Tamizharasan NISCAIR-CSIR, India, 2014 | 35 | 2014 |
| Flank wear and surface roughness prediction in hard turning via artificial neural network and multiple regressions N Senthilkumar, T Tamizharasan Australian Journal of Mechanical Engineering 13 (1), 31-45, 2015 | 31 | 2015 |
| An ANN approach for predicting the cutting inserts performances of different geometries in hard turning. N Senthilkumar, T Tamizharasan, V Anandakrishnan Advances in Production Engineering & Management 8 (4), 2013 | 31 | 2013 |
| Sintering parameters consequence on microstructure and hardness of copper alloy prepared by powder metallurgy B Deepanraj, N Senthilkumar, T Tamizharasan Materials Today: Proceedings 80, 2468-2473, 2023 | 28 | 2023 |
| Surface modification of AZ61 magnesium alloy with nano TiO2/Al2O3 using laser cladding technique S Sundaraselvan, N Senthilkumar, T Tamizharasan, AN Sait Materials Today: Proceedings 21, 717-721, 2020 | 23 | 2020 |
| Numerical simulation of effects of machining parameters and tool geometry using DEFORM-3D: optimization and experimental validation T Tamizharasan, N Senthilkumar World Journal of Modelling and Simulation 10 (1), 49-59, 2014 | 22 | 2014 |