Follow
Sheik Ismail
Sheik Ismail
Aeronautical Development Agency (ADA)
Verified email at jetmail.ada.gov.in
Title
Cited by
Cited by
Year
Numerical study of flow patterns of compact plate-fin heat exchangers and generation of design data for offset and wavy fins
LS Ismail, C Ranganayakulu, RK Shah
International journal of heat and mass transfer 52 (17-18), 3972-3983, 2009
1932009
Studies on pumping power in terms of pressure drop and heat transfer characteristics of compact plate-fin heat exchangers—A review
LS Ismail, R Velraj, C Ranganayakulu
Renewable and Sustainable Energy Reviews 14 (1), 478-485, 2010
1112010
Studies on Fanning Friction (f) and Colburn (j) Factors of Offset and Wavy Fins Compact Plate Fin Heat Exchanger–A CFD Approach
LS Ismail, R Velraj
Numerical Heat Transfer, Part A: Applications 56 (12), 987-1005, 2009
752009
Uncertainties in estimation of Colburn (j) factor and Fanning friction (f) factor for offset strip fin and wavy fin compact heat exchanger surfaces
R Ch, L Sheik Ismail, C Vengudupathi
Proceedings of the XVIII national and VII ISHMT–ASME heat and mass transfer …, 2006
52006
Effects of flow maldistribution in a compact plate-fin heat exchanger for aerospace applications–a CFD approach
C Ranganayakulu, LS Ismail, RV Vasudeva, S Rajeshwar, M Ramu
Proceedings of the 17th International Symposium on Transport Phenomena …, 2006
52006
Heat Transfer and Flow Friction correlations for Compact Wavy Plate Fin Heat Exchangers
LS Ismail, C Ranganayakulu, PS Reddy, D Jyotsna, VV Rao
19th National 8th ISHMT ASME HMT Conference, 2008
22008
Experimental and CFD analysis of multi nozzle ejector system for aircraft compact heat exchanger applications
LS Ismail, NG Rasu, V Krishnaprasad, C Ranganayakulu
Australian Journal of Mechanical Engineering 21 (4), 1311-1325, 2023
2023
Design and CFD Analysis of Compact Fuel Jet Pump for a Typical Combat Aircraft Fuel System Applications
LS Ismail, C Muthuraj, U Kumar
Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and …, 2021
2021
Performance Prediction of Combat Aircraft Fuel Jettisoning System Using Modelling and Simulation Approach
V Krishnaprasad, LS Ismail, C Muthuraj, HP Vinay
Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and …, 2021
2021
Fuel Sloshing Studies in an Inverted Flight Compartment of a Typical Combat Aircraft
LS Ismail, U Kumar
Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and …, 2021
2021
CFD analysis of single nozzle air ejector system used in aircraft Compact Heat Exchanger applications
N GovindhaRasu, LS Ismail
Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and …, 2021
2021
Optimization of a compact plate-fin heat exchanger performance – A CFD approach
RC Rajeshwar S., Ramu M., VasudevaRao V., Sheik Ismail L.
Selection of environmentally friendly refrigerants for Auto-Refrigerating Cascade (ARC) system used for low temperature applications
SILAAS Somasundaram. P.
Investigation of waviness of Wavy fins and maldistributions effects on the performance of compact plate fin heat exchanger
RMVRV Ranganayakulu C., Sheik Ismail L., Rajeshwar S.
Numerical study of flow patterns of compact plate-fin heat exchangers and generation of design data for offset and wavy fins
SILRKS Ranganayakulu C.
‘Heat transfer and flow friction correlations for compact plate fin heat exchangers
Sheik Ismail L., Ranganayakulu C., Srinivasa Reddy and Joytsana
CFD studies on multi jet ejector configuration for improvement of aircraft compact heat exchanger performance
R Sheik Ismail L., Govindha Rasu N., Ranganayakulu C.
Evaluation of ejector performance for aircraft compact heat exchanger applications – A CFD study
SHMRC Sheik Ismail .L.
Development of aircraft standard flow switch assembly (Indigenously) for the radar cooling system (RCS) of typical fighter aircraft
SIL Nagaraja K
Influence of fin cross section on thermo-hydraulic performance of offset fin heat exchangers - A CFD study
RKS Ismail. L
The system can't perform the operation now. Try again later.
Articles 1–20