Effects of tool offset, pin offset, and alloys position on maximum temperature in dissimilar FSW of AA6061 and AA5086 A Ghiasvand, M Kazemi, M Mahdipour Jalilian, H Ahmadi Rashid International Journal of Mechanical and Materials Engineering 15, 1-14, 2020 | 37 | 2020 |
Experimental and optimization of mechanical properties of epoxy/nanosilica and hybrid epoxy/fiberglass/nanosilica composites S Feli, MM Jalilian Journal of Composite Materials 50 (28), 3891-3903, 2016 | 29 | 2016 |
Investigation of tool offset on mechanical properties of dissimilar AA6061-T6 and AA7075-T6 joint in parallel FSW process A Ghiasvand, S Hassanifard, MM Jalilian, H Kheradmandan Welding in the World 65, 441-450, 2021 | 22 | 2021 |
Prediction of weld bead dilution in GMAW process using fuzzy logic M Aghakhani, MM Jalilian, A Karami Applied Mechanics and Materials 110, 3171-3175, 2012 | 22 | 2012 |
Three-dimensional solution of low-velocity impact on sandwich panels with hybrid nanocomposite face sheets S Feli, M Mahdipour Jalilian Mechanics of Advanced Materials and Structures 25 (7), 579-591, 2018 | 16 | 2018 |
Advanced Mechatronics Solutions T Brezina, R Jabłoński Springer International Publishing, 2016 | 16* | 2016 |
Predicting the combined effect of TiO2 nano-particles and welding input parameters on the hardness of melted zone in submerged arc welding by fuzzy logic M Aghakhani, MR Ghaderi, MM Jalilian, AA Derakhshan Journal of mechanical science and technology 27, 2107-2113, 2013 | 10 | 2013 |
Application of imperialist competitive algorithm in optimizing the width of heat affected zone in GMAW process M Aghakhani, MM Jalilian, M Mehdiabadi, MM Jalilian, A Karami International Journal of Modeling and Optimization 1 (3), 221, 2011 | 6 | 2011 |
Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy A Ghiasvand, M Kazemi, M Mahdipour Jalilian Amirkabir Journal of Mechanical Engineering 53 (6), 3751-3760, 2021 | 5 | 2021 |
Modeling of Weld Dilution in Gas Metal Arc Welding Process Using Taguchi's Design of Experiments M Aghakhani, E Mehrdad, E Hayati, MM Jalilian, A Karbasian Applied Mechanics and Materials 110, 2963-2968, 2012 | 4 | 2012 |
Modeling the Free Convection Heat Transfer in a Partitioned Cavity by the Use of Fuzzy Logic T Yousefi, A Karami, S Mahmoudinezhad, MM Jalilian, M Ahmadi International Journal of Modeling and Optimization 1 (4), 284, 2011 | 3 | 2011 |
Optimization of GMAW Process Using Imperialist Competitive Algorithm M Aghakhani, MM Jalilian, A Karami, MM Jalilian Applied Mechanics and Materials 110, 3575-3579, 2012 | 2 | 2012 |
Experimental and Theoretical Investigation of Mechanical Properties of Functionally Graded Epoxy/Graphene Nanocomposite M Alipoor, M Karami Khorramabadi, M Mahdipour Jalilian Journal of Stress Analysis, 2023 | 1 | 2023 |
Finite Element Analysis of the Impact Behavior of Sandwich Panels with Nanocomposite Face sheet (Epoxy/Fiberglass/Nanosilica) A Azadi, MK Khorramabadi, MM Jalilian International Journal of Advanced Design and Manufacturing Technology 16, 25-33, 2023 | 1 | 2023 |
Dynamic stability analysis of functionally graded epoxy/clay nanocomposite beams subjected to periodic axial loads MK Khorramabadi, MM Jalilian Journal of the Brazilian Society of Mechanical Sciences and Engineering 45 …, 2023 | 1 | 2023 |
Experimental Investigation of impact damage response of sandwich panels with epoxy/woven-fiberglass/nano-silica composite face-sheets M Mahdipour Jalilian, S Feli Journal of Stress Analysis 5 (1), 57-67, 2020 | 1 | 2020 |
Investigation of exerted force on roller and roller width effects on residual stresses in direct and indirect rolling of FSW of SU304 steel A Ghiasvand, M Kazemi, M Mahdipour Jalilian, H Kheradmandan Journal of Stress Analysis 4 (2), 115-125, 2020 | 1 | 2020 |
Investigation of the Effect of Nano-Al2O3 Addition on the Tensile and Flexural Strengths of Friction Stir Processed Polycarbonate K Ahmad Abdolabas, M Mahdipour Jalilian, M Karami Khorramabadi Journal of Stress Analysis, 2024 | | 2024 |
Evaluation of Critical Buckling Load in FG Plate using Analytical and Finite Elements Methods H Ahmadi Rashid, A Ghiasvand, M Mahdipour Jalilian, M Kazemi ADMT Journal 15 (3), 47-54, 2022 | | 2022 |
Modeling and Optimizing the Penetration in the Submerged Arc Welding Process in the Presence of ZrO2 Nanoparticles H Kheradmandan, M Aghakhani, T Kheradmandan, S Kheradmandan, ... Materials Performance and Characterization 11 (1), 1-21, 2022 | | 2022 |