Surface roughness after machining and influence of feed rate on process R Čep, A Janásek, J Petrů, M Sadilek, P Mohyla, J Valíček, M Harničárová, ... Key Engineering Materials 581, 341-347, 2014 | 68 | 2014 |
Cutting tool wear monitoring with the use of impedance layers M Sadílek, J Kratochvíl, J Petru, R Cep, T Zlámal, D Stancekova Tehnicki Vjesnik 21 (3), 639-644, 2014 | 52 | 2014 |
Influence of cutting parameters on heat-affected zone after laser cutting J Petru, T Zlamal, R Cep, K Monkova, P Monka Tehnicki vjesnik 20 (1), 225-230, 2013 | 48 | 2013 |
Experimental testing of exchangeable cutting inserts cutting ability R Čep, A Janásek, L Čepová, J Petrů, I Hlavatý, Z Car, M Hatala Tehnički vjesnik 20 (1), 21-26, 2013 | 41 | 2013 |
On flexural properties of additive manufactured composites: Experimental, and numerical study D Krzikalla, J Měsíček, R Halama, J Hajnyš, M Pagáč, T Čegan, J Petrů Composites science and technology 218, 109182, 2022 | 36 | 2022 |
Tangential turning of Incoloy alloy 925 using abrasive water jet technology J Cárach, S Hloch, P Hlaváček, J Ščučka, P Martinec, J Petrů, T Zlámal, ... The International Journal of Advanced Manufacturing Technology 82, 1747-1752, 2016 | 35 | 2016 |
Výrobní stroje obráběcí J Brychta, R Čep, J Petrů Vysoká škola báňská-Technická univerzita, 2003 | 33 | 2003 |
Complex corrosion properties of AISI 316L steel prepared by 3D printing technology for possible implant applications J Hlinka, M Kraus, J Hajnys, M Pagac, J Petrů, Z Brytan, T Tański Materials 13 (7), 1527, 2020 | 32 | 2020 |
Acoustic chamber length performance analysis in ultrasonic pulsating water jet erosion of ductile material A Nag, S Hloch, D Čuha, AR Dixit, H Tozan, J Petrů, M Hromasova, ... Journal of Manufacturing Processes 47, 347-356, 2019 | 32 | 2019 |
Investigating the Impact of Cu2+ Doping on the Morphological, Structural, Optical, and Electrical Properties of CoFe2O4 Nanoparticles for Use in Electrical Devices S Saleem, M Irfan, MY Naz, S Shukrullah, MA Munir, M Ayyaz, AS Alwadie, ... Materials 15 (10), 3502, 2022 | 30 | 2022 |
Microstructure and mechanical properties of modified 316L stainless steel alloy for biomedical applications using powder metallurgy S Ali, M Irfan, UM Niazi, AMA Rani, A Rashedi, S Rahman, MKA Khan, ... Materials 15 (8), 2822, 2022 | 24 | 2022 |
Influence of the frequency and flow rate of a pulsating water jet on the wear damage of tantalum A Nag, P Hvizdos, AR Dixit, J Petrů, S Hloch Wear 477, 203893, 2021 | 23 | 2021 |
A new method for the prediction of laser cut surface topography M Harničárová, J Valíček, M Kušnerová, R Grznárik, J Petrů, L Čepová Measurement Science Review 12 (5), 195-204, 2012 | 23 | 2012 |
Effect of additives and print orientation on the properties of laser sintering-printed polyamide 12 components L Zárybnická, J Petrů, P Krpec, M Pagáč Polymers 14 (6), 1172, 2022 | 21 | 2022 |
Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys P Snopiński, M Król, M Pagáč, J Petrů, J Hajnyš, T Mikuszewski, T Tański Archives of Civil and Mechanical Engineering 21 (3), 92, 2021 | 20 | 2021 |
The effect of feed rate on durability and wear of exchangeable cutting inserts during cutting Ni-625 J Petrů, T Zlámal, R Čep, M Sadílek Sveučilište Josipa Jurja Strossmayera u Osijeku. Strojarski fakultet …, 2017 | 20 | 2017 |
Hydroabrasive disintegration of rotating Monel K-500 workpiece J Cárach, S Hloch, J Petrů, A Nag, M Gombár, M Hromasová The International Journal of Advanced Manufacturing Technology 96, 981-1001, 2018 | 18 | 2018 |
Ultrasonic pulsating water jet peening: influence of pressure and pattern strategy G Stolárik, A Nag, J Petrů, J Svobodová, S Hloch Materials 14 (20), 6019, 2021 | 16 | 2021 |
Topological optimization of the formula student bell crank J Měsíček, M Pagáč, J Petrů, P Novák, J Hajnyš, K Kutiová MM Science, 2019 | 16 | 2019 |
A study of effects of changing the position of the tool axis against the machined surface M Sadilek, F Fojtík, Z Sadílková, K Kolařík, J Petrů Transactions of FAMENA 39 (2), 33-46, 2015 | 15 | 2015 |