HDPE pipes failure analysis and damage modeling F Majid, M Elghorba Engineering failure analysis 71, 157-165, 2017 | 52 | 2017 |
Residual life prediction of defected Polypropylene Random copolymer pipes (PPR) A Ouardi, F Majid, N Mouhib, M Elghorba Frattura ed Integrità Strutturale 12 (43), 97-105, 2018 | 18 | 2018 |
Design and Manufacturing of a 3D printer filaments extruder T Hachimi, N Naboulsi, F Majid, R Rhanim, I Mrani, H Rhanim Procedia Structural Integrity 33, 907-916, 2021 | 17 | 2021 |
Mechanical behavior and crack propagation of ABS 3D printed specimens F Majid, N Zekeriti, M Lahlou, B Mrani Procedia Structural Integrity 28, 1719-1726, 2020 | 17 | 2020 |
Corrosion influence on lifetime prediction to determine the Wöhler curves of outer layer strand of a steel wire rope A Jikal, F Majid, H Chaffoui, M Meziane, M ELghorba Engineering Failure Analysis 109, 104253, 2020 | 16 | 2020 |
Influence of corrosion on the mechanical behavior of strand of a non-rotating wire rope: experimental study A Jikal, F Majid, H Chaffou, M El Ghorba Procedia Structural Integrity 18, 731-741, 2019 | 13 | 2019 |
Mechanical behavior prediction of PPR and HDPE polymers through newly developed nonlinear damage-reliability models F Majid, A Ouardi, M Barakat, M Elghorba Procedia structural integrity 3, 387-394, 2017 | 13 | 2017 |
Continuum damage modeling through theoretical and experimental pressure limit formulas F Majid, M Elghorba Frattura ed Integrità Strutturale 12 (43), 79-89, 2018 | 12 | 2018 |
Burst behavior of CPVC compared to HDPE thermoplastic polymer under a controlled internal pressure F Majid, M Safe, M Elghorba Procedia structural integrity 3, 380-386, 2017 | 11 | 2017 |
Mode I stress intensity factors of printed and extruded specimens based on Digital Image Correlation method (DIC): case of ABS material N Zekriti, R Rhanim, F Majid, M Lahlou, M Ibrahim, H Rhanim Procedia Structural Integrity 28, 1745-1754, 2020 | 8 | 2020 |
Critical lifetime of HDPE pipes through damage and reliability models F Majid, M Elghorba Journal of Mechanical Engineering and Sciences 13 (3), 5228-5241, 2019 | 6 | 2019 |
Damage assessment of HDPE thermoplastics pipes F MAJID Journal of Advanced Research in Physics 6 (2), 2017 | 6 | 2017 |
PVC failure modelling through experimental and digital image correlation measurements N Zekriti, F Majid, R Rhanim, I Mrani, H Rhanim Frattura ed Integrità Strutturale 16 (60), 488-503, 2022 | 5 | 2022 |
Maintainability and reliability of high density polyethylene pipes through experimental and theoretical models F Majid, R Rhanim, M Lahlou, H Rhanim, M Ezzahi, M Elghorba Procedia Structural Integrity 25, 430-437, 2020 | 5 | 2020 |
Structural integrity of a doubly fed induction generator (DFIG) of a wind power system (WPS) M Ezzahi, M Khafallah, F Majid Procedia Structural Integrity 9, 221-228, 2018 | 4 | 2018 |
Probabilistic study by Weibull method of CPVC pipes fracture behavior under pressure and temperature effect M Safe, J Nattaj, F Majid, M Elghorba International Journal of Mechanical Engineering and Technology 8 (12), 644-651, 2017 | 4 | 2017 |
Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue F Majid, J Nattaj, M Elghorba Frattura ed Integrità Strutturale 10 (38), 273-280, 2016 | 4 | 2016 |
Phosphogypsum valorization in cement: Experimental study of the PG effect and the water-to-cement ratio on the flexural strength of cement paste A Azifa, I Chouaybi, Y Ennaciri, I Zdah, A Cherrat, F Majid, M Bettach, ... Sustainable Chemistry and Pharmacy 38, 101474, 2024 | 3 | 2024 |
Delamination effect on the mechanical behavior of 3D printed polymers F Majid, T Hachimi, H Rhanim, R Rhanim Frattura ed Integrità Strutturale 17 (63), 26-36, 2023 | 3 | 2023 |
The effect of using polypropylene fibers on the durability and fire resistance of concrete H Suiffi, A El Maliki, F Majid, O Cherkaoui Frattura ed Integrità Strutturale 15 (58), 296-307, 2021 | 3 | 2021 |