Effect of infill Parameter on compression property in FDM Process T Abbas, FM Othman, HB Ali dimensions 12 (7), 25-4, 2017 | 104 | 2017 |
Influence of layer thickness on impact property of 3D-printed PLA TF Abbas, FM Othman, HB Ali Int. Res. J. Eng. Technol.(Irjet) 5, 1-4, 2018 | 46 | 2018 |
Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite HA Sallal, AA Abdul-Hamead, FM Othman Defence Technology 16 (2), 425-431, 2020 | 39 | 2020 |
Green Synthesis of Silver Nanoparticles from Natural Compounds: Glucose, Eugenoland Thymol MS Abed, AS Abed, FM Othman Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 60 (1 …, 2019 | 35 | 2019 |
Influence of process parameters on mechanical properties and printing time of FDM PLA printed parts using design of experiment FM Othman, T Fadhil, AHB Ali J. Eng. Res 8, 2248-9622, 2018 | 32 | 2018 |
Preparation of MgO–MnO 2 nanocomposite particles for cholesterol sensors AA Abdul-Hamead, FM Othman, MA Fakhri Journal of Materials Science: Materials in Electronics 32 (11), 15523-15532, 2021 | 25 | 2021 |
A study of mechanical properties of poly methacrylate polymer reinforced by silica particles (SiO2) JK Oleiwi, FM Othman, IF Ghaze Eng. &Tech. Journal 31 (15), 2925-2941, 2013 | 25 | 2013 |
Effect of adding silicon carbide and titanium carbide nanoparticles on the performance of the cement pastes A Mahawish, SI Ibrahim, AH Jawad, FM Othman J. Civ. Environ. Eng 7 (04), 2017 | 17 | 2017 |
Preparation of Al2O3/MgO nano-composite particles for bio-applications HA Sallal, AA Abdul-Hameed, F Othman Engineering and Technology Journal 38 (4A), 586-593, 2020 | 13 | 2020 |
Compressive and tensile properties of ABS material as a function of 3D printing process parameters HB Ali, JK Oleiwi, FM Othman Revue des composites et des matériaux avancés 32 (3), 117, 2022 | 12 | 2022 |
Investigation the effect of nano–particles and recycling mortar additives on physical and mechanical properties of concrete AA Abdul-Hamead, FM Othman, RK Mohammed Engineering and Technology Journal 36 (3A), 295-303, 2018 | 9 | 2018 |
Experimental investigation of cement encapsulated with different polymers for self-healing applications RT Salman, FM Othman, AA Abdul-Hamead Materials Today: Proceedings 42, 1941-1945, 2021 | 8 | 2021 |
Casting simulation and prediction of shrinkage cavities AS Jabur, FM Kushnaw Journal of Applied & Computational Mathematics 6 (4), 7, 2017 | 8 | 2017 |
Improve mass concrete by controlling the crack sealing mechanism using microcapsules of zinc oxide AZ Dahesh, FM Othman, AA Abdul-Hamead Materials Science Forum 1002, 541-550, 2020 | 7 | 2020 |
Influence of Layer Thickness on Compression Property of 3D-Printed PLA T Fadhil, FM Othman, HB Ali Al-Muhandis Journal 154, 41-48, 2017 | 7 | 2017 |
The effect of nano fly ash on properties of cement mortar AA Abdul-hamead, FM Othman, NA Hmeed AIP Conference Proceedings 2045 (1), 2018 | 6 | 2018 |
Effect of nano-alumina on microstructure and mechanical properties of recycled concrete RK Mohammed, AA Abdel-Hamead, FM Othman Journal of Engineering and Sustainable Development 22 (2), 90-103, 2018 | 6 | 2018 |
Study of ZnO, SnO2 and Compounds ZTO Structures DFM Othman, DAA Abdul-Hamead, AS Taeeh Eng. &Tech.Journal 33 (Part (A), No.6), 1328-1340, 2015 | 6 | 2015 |
Investigation and analysis of infill density on impact property of PLA in 3D printing TF Abbas, FM Othman, HB Ali International Journal of Research Science and Management 5 (2), 115-120, 2018 | 5 | 2018 |
Studying the Effect of Nano Additives and Coating on Some Properties of Cement Mortar Mixes FM Othman, AAA Hameed, SI Ibrahim Eng. &Tech.Journal 34 (Part (A), No.3), 553-566, 2016 | 5 | 2016 |