Pengaruh Variasi Kecepatan dan Kuat Arus Terhadap Kekerasan, Tegangan Tarik, Struktur Mikro Baja Karbon Rendah Dengan Elektroda E6013. AS Mohruni, BH Kembaren Jurnal Rekayasa Mesin 13 (1), 001-008, 2013 | 47 | 2013 |
Application of RSM and ANN in Predicting Surface Roughness for Side Milling Process under Environmentally Friendly Cutting Fluid M Yanis, AS Mohruni, S Sharif, I Yani, A Arifin, BK ah Journal of Physics: Conference Series 1198 (042016), 1-6, 2019 | 32 | 2019 |
Effects of Metal Fillers on Properties of Epoxy for Rapid Tooling Inserts MTM Khushairi, S Sharif, KR Jamaludin, AS Mohruni International Journal on Advanced Science, Engineering and Information …, 2017 | 28 | 2017 |
Optimization of surface roughness prediction model in end milling Titanium Alloy (Ti-6Al4V) S Sharif, AS Mohruni, M Noordin, VC Venkatesh Proceedings of ICOMAST2006 International Conference on Manufacturing Science …, 2006 | 28 | 2006 |
Development of Surface Roughness Prediction Model for Hard Turning on AISI D2 Steel using Cubic Boron Nitride Insert AS Mohruni, M Yanis, E Kurniawan Jurnal Teknologi (Sciences and Engineering): https://jurnalteknologi.utm.my …, 2018 | 23 | 2018 |
Performance Evaluation of Uncoated and Coated Carbide Tools when End Milling of Titanium Alloy using Response Surface Methodology AS Mohruni Universiti Teknologi Malaysia, 2008 | 23 | 2008 |
A Review of Minimum Quantity Lubrication Technique with Nanofluids Application in Metal Cutting Operations S Sharif, IO Sadiq, NM Yusof, AS Mohruni International Journal on Advanced Science, Engineering and Information …, 2017 | 20 | 2017 |
A Comparison RSM and ANN Surface Roughness Models in Thin-Wall Machining of Ti6Al4V using Vegetable Oils under MQL-Condition AS Mohruni, M Yanis, S Sharif, I Yani, E Yuliwati, AF Ismail, Z Shayfull AIP Conference Proceeding 1885 (020161), 1-9, 2017 | 13 | 2017 |
Evaluation of cutting force and surface roughness in high-speed milling of compacted graphite iron MA Suhaimi, KH Park, S Sharif, DW Kim, AS Mohruni MATEC Web of Conferences https://doi.org/10.1051/matecconf/201710103016 101 …, 2017 | 13 | 2017 |
Optimum Milling Parameters of Sugarcane Juice Production Using Artificial Neural Networks (ANN) D Oktarini, AS Mohruni, S Sharif, M Yanis, Madagaskar Journal of Physics: Conference Series 1167 (012016), 1-11, 2019 | 12 | 2019 |
Palm Stearin as Alternative Binder for MIM: A Review A Arifin, S AB, G Gunawan, AS Mohruni, I Yani Journal of Ocean, Mechanical and Aerospace-Science and Engineering 7 (1), 18-23, 2014 | 12 | 2014 |
OPTIMUM PERFORMANCE OF GREEN MACHINING ON THIN WALLED TI6AL4V USING RSM AND ANN IN TERMS OF CUTTING FORCE AND SURFACE ROUGHNESS M Yanis, AS Mohruni, S Sharif, I Yani Jurnal Teknologi (Sciences and Engineering), https://jurnalteknologi.utm.my …, 2019 | 10 | 2019 |
A probability approach in cans identification Y Resti, AS Mohruni, F Burlian, I Yani, A Amran MATEC Web of Conferences https://doi.org/10.1051/matecconf/201710103012 101 …, 2017 | 10 | 2017 |
Cutting force prediction when green machining of thin-walled Ti-6Al-4V under dry and MQL-cutting using response surface methodology and artificial neural networks-algorithm M Yanis, AS Mohruni, S Sharif, I Yani, Z Suzen, ZA Ahmad AIP Conference Proceedings 2129 (1), 2019 | 9 | 2019 |
Study in Development of Cans Waste Classification System Based on Statistical Approaches Y Resti, AS Mohruni, T Rodiana, DA Zayanti Journal of Physics: Conference Series 1198 (092004), 1-6, 2019 | 9 | 2019 |
Production planning and control system with just in time and lean production: a review A Afriansyah, AS Mohruni Journal of Mechanical Science and Engineering 6 (2), 019-027, 2019 | 9 | 2019 |
Modeling of tool life when end milling on Titanium Alloy (Ti-6Al-4V) using response surface methodology S Sharif, AS Mohruni, MY Noordin InProceeding of 1st International Conference & 7th AUN/SEED-Net Field wise …, 2006 | 9 | 2006 |
Machinability Investigation when Drilling Titanium Alloys (Drilling technology) EA Rahim, S Sharif, ZA Ahmad, AS Mohruni, IA Syed Proceedings of International Conference on Leading Edge Manufacturing in …, 2005 | 9 | 2005 |
Evaluation of surface integrity when drilling Inconel 718 through experimental measurement and finite element analysis M Lotfi, AA Farid, J Akbari, S Sharif, AS Mohruni The International Journal of Advanced Manufacturing Technology, 1-12, 2022 | 7 | 2022 |
Feasibility Study of PVC Pipes as Vertical Axis Wind Turbines Type Savonius Bucket for Remote Areas Application D Adanta, K Sahim, AS Mohruni International Journal on Energy Conversion (I.R.E.CON.): https://doi.org/10 …, 2021 | 7* | 2021 |