Follow
Yongchan Kim
Title
Cited by
Cited by
Year
Heat transfer and pressure drop characteristics during the in-tube cooling process of carbon dioxide in the supercritical region
SH Yoon, JH Kim, YW Hwang, MS Kim, K Min, Y Kim
International journal of refrigeration 26 (8), 857-864, 2003
3532003
Characteristics of evaporative heat transfer and pressure drop of carbon dioxide and correlation development
SH Yoon, ES Cho, YW Hwang, MS Kim, K Min, Y Kim
International Journal of refrigeration 27 (2), 111-119, 2004
2302004
Comparison of the heating performance of air-source heat pumps using various types of refrigerant injection
J Heo, MW Jeong, C Baek, Y Kim
International Journal of Refrigeration 34 (2), 444-453, 2011
1772011
Modeling of frost growth and frost properties with airflow over a flat plate
R Yun, Y Kim, M Min
International Journal of Refrigeration 25 (3), 362-371, 2002
1732002
The effects of improper refrigerant charge on the performance of a heat pump with an electronic expansion valve and capillary tube
JM Choi, YC Kim
Energy 27 (4), 391-404, 2002
1732002
Capacity modulation of an inverter-driven multi-air conditioner using electronic expansion valves
JM Choi, YC Kim
Energy 28 (2), 141-155, 2003
1632003
Heat transfer characteristics of flat plate finned-tube heat exchangers with large fin pitch
Y Kim, Y Kim
International Journal of Refrigeration 28 (6), 851-858, 2005
1592005
Convective boiling heat transfer characteristics of CO2 in microchannels
R Yun, Y Kim, MS Kim
International Journal of Heat and Mass Transfer 48 (2), 235-242, 2005
1562005
Effects of flash tank vapor injection on the heating performance of an inverter-driven heat pump for cold regions
J Heo, MW Jeong, Y Kim
International Journal of Refrigeration 33 (4), 848-855, 2010
1492010
Thermodynamic analysis on the performance of a variable speed scroll compressor with refrigerant injection
YC Park, Y Kim, H Cho
International Journal of Refrigeration 25 (8), 1072-1082, 2002
1472002
Boiling heat transfer and dryout phenomenon of CO2 in a horizontal smooth tube
R Yun, Y Kim, MS Kim, Y Choi
International Journal of Heat and Mass Transfer 46 (13), 2353-2361, 2003
1442003
Evaporative heat transfer and pressure drop of R410A in microchannels
R Yun, JH Heo, Y Kim
International journal of refrigeration 29 (1), 92-100, 2006
1432006
The effects of air stoichiometry and air excess ratio on the transient response of a PEMFC under load change conditions
B Kim, D Cha, Y Kim
Applied energy 138, 143-149, 2015
1342015
Evaporation heat transfer characteristics of R-410A in 7 and 9.52 mm smooth/micro-fin tubes
Y Kim, K Seo, JT Chung
International journal of refrigeration 25 (6), 716-730, 2002
1322002
An experimental study on water transport through the membrane of a PEFC operating in the dead-end mode
Y Lee, B Kim, Y Kim
International journal of hydrogen energy 34 (18), 7768-7779, 2009
1312009
Mass flow characteristics and empirical modeling of R22 and R410A flowing through electronic expansion valves
C Park, H Cho, Y Lee, Y Kim
International Journal of Refrigeration 30 (8), 1401-1407, 2007
1292007
Thermal performance of direct two-phase refrigerant cooling for lithium-ion batteries in electric vehicles
SH Hong, DS Jang, S Park, S Yun, Y Kim
Applied Thermal Engineering 173, 115213, 2020
1282020
Heating performance characteristics of a dual source heat pump using air and waste heat in electric vehicles
JH Ahn, H Kang, HS Lee, HW Jung, C Baek, Y Kim
Applied Energy 119, 1-9, 2014
1282014
A generalized correlation for evaporation heat transfer of refrigerants in micro-fin tubes
R Yun, Y Kim, K Seo, HY Kim
International journal of heat and mass transfer 45 (10), 2003-2010, 2002
1182002
Performance characteristics of a novel heat pipe-assisted liquid cooling system for the thermal management of lithium-ion batteries
DS Jang, S Yun, SH Hong, W Cho, Y Kim
Energy Conversion and Management 251, 115001, 2022
1102022
The system can't perform the operation now. Try again later.
Articles 1–20