Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading K Wille, S El-Tawil, AE Naaman Cement and Concrete Composites 48, 53-66, 2014 | 849 | 2014 |
Ultra-High Performance Concrete with Compressive Strength Exceeding 150 MPa (22 ksi): A Simpler Way. K Wille, AE Naaman, GJ Parra-Montesinos ACI materials journal 108 (1), 2011 | 772 | 2011 |
Strain-hardening UHP-FRC with low fiber contents K Wille, DJ Kim, AE Naaman Materials and structures 44, 583-598, 2011 | 536 | 2011 |
Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing K Wille, AE Naaman, S El-Tawil, GJ Parra-Montesinos Materials and structures 45, 309-324, 2012 | 460 | 2012 |
Pullout Behavior of High-Strength Steel Fibers Embedded in Ultra-High-Performance Concrete. K Wille, AE Naaman ACI Materials Journal 109 (4), 2012 | 309 | 2012 |
Strain rate dependent properties of ultra high performance fiber reinforced concrete (UHP-FRC) under tension S Pyo, K Wille, S El-Tawil, AE Naaman Cement and Concrete Composites 56, 15-24, 2015 | 216 | 2015 |
Material efficiency in the design of ultra-high performance concrete K Wille, C Boisvert-Cotulio Construction and Building Materials 86, 33-43, 2015 | 194 | 2015 |
Compression response of normal and high strength pervious concrete R Zhong, K Wille Construction and Building Materials 109, 177-187, 2016 | 182 | 2016 |
Material design and characterization of high performance pervious concrete R Zhong, K Wille Construction and Building Materials 98, 51-60, 2015 | 175 | 2015 |
The path to ultra-high performance fiber reinforced concrete (UHP-FRC): five decades of progress AE Naaman, K Wille Proceedings of Hipermat, 3-15, 2012 | 172 | 2012 |
Effect of loading rates on pullout behavior of high strength steel fibers embedded in ultra-high performance concrete M Xu, B Hallinan, K Wille Cement and Concrete Composites 70, 98-109, 2016 | 167 | 2016 |
Effect of ultra-high-performance concrete on pullout behavior of high-strength brass-coated straight steel fibers K Wille, AE Naaman ACI Materials Journal 110 (4), 451, 2013 | 161 | 2013 |
Optimizing Ultra-High-Performance Fiber-Reinforced Concrete. K Wille, AE Naaman, S El-Tawil Concrete international 33 (9), 2011 | 147 | 2011 |
Effect of Beam Size, Casting Method, and Support Conditions on Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete. K Wille, GJ Parra-Montesinos ACI Materials Journal 109 (3), 2012 | 145 | 2012 |
Experimental impact analysis on ultra-high performance concrete (UHPC) for achieving stress equilibrium (SE) and constant strain rate (CSR) in Split Hopkinson pressure bar … M Hassan, K Wille Construction and Building Materials 144, 747-757, 2017 | 123 | 2017 |
Influence of pore tortuosity on hydraulic conductivity of pervious concrete: Characterization and modeling R Zhong, M Xu, RV Netto, K Wille Construction and Building Materials 125, 1158-1168, 2016 | 111 | 2016 |
Nanoengineering ultra-high-performance concrete with multiwalled carbon nanotubes K Wille, KJ Loh Transportation Research Record 2142 (1), 119-126, 2010 | 108 | 2010 |
Push-out behavior of headed shear studs welded on thin plates and embedded in UHPC D Kruszewski, K Wille, AE Zaghi Engineering Structures 173, 429-441, 2018 | 104 | 2018 |
Linking pore system characteristics to the compressive behavior of pervious concrete R Zhong, K Wille Cement and Concrete Composites 70, 130-138, 2016 | 104 | 2016 |
Fracture energy of UHP-FRC under direct tensile loading applied at low strain rates M Xu, K Wille Composites Part B: Engineering 80, 116-125, 2015 | 100 | 2015 |